[Fix] Ethernet Not Working But WIFI Is on (100% working)

Ethernet is a fundamental requirement for many individuals nowadays since it provides a simple and secured way of communicating among colleagues or acquaintances who are located within a particular geographical location. So if it isn’t functioning but the WIFI does, you can turn off the WIFI to see if it helps. If it doesn’t, look for any underlying issues that might be causing the issue. 

So, why is it that your Ethernet is not working, but your WIFI is perfect? 

A virus, lost or damaged drivers, blocked interfaces, defective wiring, improper configurations, and device and system software issues are among the most common causes of network connectivity problems.  

It’s possible that your Ethernet isn’t working because of one or more of the causes listed above. Using a few tried-and-true techniques, you should be able to fix all of these without any effort. Let’s take a closer look at this below. 

Reasons Behind the Problem – ‘Why Ethernet Is Not Working but WiFi Is on’

As previously stated, this condition can be caused by a variety of factors. The causes behind this are discussed in greater depth below.

1. Viruses

Viruses can disable any net connection in your computer. When you have an antivirus program installed, it is possible that it is ineffectual or that a virus has deceived it into restricting the connection.

2.  Ethernet Drivers That either Faulty or Missing

Installing the most recent and suitable drivers is required for Ethernet to function. Unless you uninstall these, the WIFI will continue to operate as usual. Viral infections can damage such drivers, rendering them inoperable in some instances.

3. Connection Has Been Disabled

You will be unable to utilize the network whether it is deactivated. Check to see if the net is linked by going to “Local Area Connection” and clicking on it. If it displays “Not Connected,” which indicates that the connection was lost. You can correct the problem and proceed with the troubleshooting process if required.

4. Malfunctioned Cables

It can be caused by faulty cabling. Track the status of your internet connections inside “Network Connections.” If it displays “Network cable unplugged,” this means that your network adapter is unable to determine whether or not you have attached a cable. 

To ensure proper connection, double-check that the cable is properly attached to both the modem, switch, router, and an Ethernet port from the other. You could experiment with a new port. Whether it succeeds, means that the connection has failed.

5. Wrong Connection Information

You may be asked to manually enter your connection information. If you do not have the right version, your Ethernet will not function properly.

6. Hardware and Operating System Issues

Once you’ve tried everything but nothing is functioning, your windows may be the source of the problem. You have the option of booting from a new operating system. If it solves the problem, the fault is most likely with the operating system. Otherwise, your system is most likely the source of your difficulty.

Fixing Methods Showing – ‘Ethernet is not Working But WIFI Is on’ Problem

Each of the above-mentioned reasons of Ethernet not working but WIFI problem can be resolved with relative ease. Find out what you’ll have to do to deal with each of these in the sections below.

1. Remove all the Viruses

As a result of their brutal nature, viruses shouldn’t be allowed to enter your computer system. If you’ve not already, download and install an effective antivirus program that has sophisticated security features. Afterward, run it to check your system and consider the on-screen instructions to remove any viruses that may be present.

2. Manually Download and Install the Ethernet Drivers

You should allow your computer to manually reinstall these drivers if you’ve already done so. On a Ms. Windows pc, you can speed up the process by using an automated application such as DriverFix to identify and fix driver problems. This safeguards you from the possibility of choosing the incorrect drivers first from a large web database. These drivers can behave similarly to viruses and trigger a sequence of failures.

3. Make Sure Your Ethernet Connection Is Turned On

You can use the following steps to activate the Ethernet connection:

Step 1: First, you have to right-click on the start button and navigate to the “Local Area Connection.”

Step 2: Then, you have to check if it shows “Not Connected” or not. If that’s the case, move on to the next process.

Step 3: Now, you have to right-click on the option and hit on the “Enable.”

Step 4: Wait a few moments and see whether the network is functional.

Step 5: Evaluate the Ethernet Cable as well as the Ports

Even during the configuration stage, once you discovered that the wire is faulty, you should replace it immediately. By switching cables, you may have learned whether the connectors were functional or not. Inside the interim, you can either fix the ports else make use of a functioning one.

Step 6: Make sure you have accurate connection information.

Enter your connection’s information. Follow these steps to do so:

Step 7: Next, you have to right-click on the Ethernet connection. Then, navigate to the “Properties.” 

Step 8: Select “Internet Protocol Version 4 (TCP/IPv4)” from the drop-down menu. 

Step 9: Provide your connection information.

It is possible that what you believe to be an operating system problem is a network-related problem. Setting up a new operating system, on the other hand, might be the solution once for all. It is critical to upgrade to the most recent edition of your operating system, as most of these include all of the necessary drivers. 

If you connect the Ethernet cable but receive no response, it can be because of any one of these causes listed above. 

It’s possible that your Wiring or perhaps the sockets on your pc have failed due to a malfunction. Alternatively, viruses may affect your computer.

Other possibilities are that your drivers are failed, that your network has been disabled, or that your connecting information is inaccurate. It’s possible that your computer has acquired hardware problems, that your VPN connection needs to be removed or deactivated, or that something else is causing the problem. 

Eliminate viruses from your computer using a reputable antivirus program, then install the most recent Ethernet ports to activate your connection. 

When that doesn’t succeed, double-check that you’ve entered the appropriate connection information, switch off your antivirus software, and get assistance from a computer specialist. Before you go in it, you should try to reset your Ethernet like a final option, if at all possible.

To Reboot Your Ethernet Connection, Perform the Following Steps

Step 1: First, you have to go to the “Settings.”

Step 2: Once, you enter the settings menu, you have to select the “Network & Internet” and then, navigate to the “Status.”

Step 3: Search for the Network reset and select “Reset now.”

Step 4: Finally, you have to click on the “Yes” option.

Be aware of the fact that your system will automatically reconfigure all of your ethernet switches when you hit on “Yes.” Furthermore, it will return other critical components to their factory default settings. As a result, it is quite likely that some other network programs, such as virtualization, will be removed. As a result, you will be able to reinstall all if necessary.

Conclusion

Whenever your Ethernet fails but your WiFi works, you already know what to do. Switch it off WIFI first assuming there’s an issue. If your operating system can connect to both, Ethernet will take precedence. When that doesn’t work, as I’ve shown in this blog, you can examine then solve the issue.